Wide 170° Night Vision Car Rear View Reverse Backup Parking Camera Waterproof

Description

Categories
Wide 170° Night Vision Car Rear View Reverse Backup Parking Camera Waterproof
Description
Features
Easy to install.
Rear/Front switchable: Customizable distance scale and mirror/normal image switchable - you can use it as a rear view backup camera or front/side camera.
Note: By default, this is a front camera without a distance scale
170 degree wide viewing angle: helps you see blind spots that are out of reach of your eyes Uses an audio mainframe or aftermarket LCD/TFT display with standard RCA input
Highlights: This camera is a front-facing camera with no distance scale as a default setting for backup. To use it as a rear view camera, you need to cut the green ring wire. To display the parking guide, cut the white ring cable.
Cut the white cable: Cancel the parking line.
Cut green cable: switch normal image (front view) to mirror image (rear view).
Cut the orange cable: switch from CVBS mode to AHD mode
(Note: If you want to use AHD mode, you need to have an AHD channel on the monitor)
Specification
Type Car rear/front/side view camera
Sensor PC1030 1/3-inch color CMOS
Effective pixels NTSC 1280*720 pixels
TV System NTSC AHD/CVBS Switching
Lens angle 170 degrees
Electronic shutter 1/60(NTSC), 1/50(PAL)-1/10,000s
Resolution 480 TV lines
Minimum Illumination 0.2Lux
Power supply DC 12V
Power consumption 0.5W max.
Operating temperature -20 degree Celsius to +75 degree Celsius (RH95% Max.)
Storage temperature -40 deg C to +85 deg C (RH95%Max.)
Waterproof IP67
Color: Black
Video cable length 6m/19.68 ft
Suitable for a wide range of vehicles: cars, small trucks, minivans, etc. 12V operating voltage only
Package includes
1 x Car rear/front/side view camera
1 x Video cable
1 x Power cable
2 x Screws
Wide 170° Night Vision Car Rear View Reverse Backup Parking Camera Waterproof
Description
Features
Easy to install.
Rear/Front switchable: Customizable distance scale and mirror/normal image switchable - you can use it as a rear view backup camera or front/side camera.
Note: By default, this is a front camera without a distance scale
170 degree wide viewing angle: helps you see blind spots that are out of reach of your eyes Uses an audio mainframe or aftermarket LCD/TFT display with standard RCA input
Highlights: This camera is a front-facing camera with no distance scale as a default setting for backup. To use it as a rear view camera, you need to cut the green ring wire. To display the parking guide, cut the white ring cable.
Cut the white cable: Cancel the parking line.
Cut green cable: switch normal image (front view) to mirror image (rear view).
Cut the orange cable: switch from CVBS mode to AHD mode
(Note: If you want to use AHD mode, you need to have an AHD channel on the monitor)
Specification
Type Car rear/front/side view camera
Sensor PC1030 1/3-inch color CMOS
Effective pixels NTSC 1280*720 pixels
TV System NTSC AHD/CVBS Switching
Lens angle 170 degrees
Electronic shutter 1/60(NTSC), 1/50(PAL)-1/10,000s
Resolution 480 TV lines
Minimum Illumination 0.2Lux
Power supply DC 12V
Power consumption 0.5W max.
Operating temperature -20 degree Celsius to +75 degree Celsius (RH95% Max.)
Storage temperature -40 deg C to +85 deg C (RH95%Max.)
Waterproof IP67
Color: Black
Video cable length 6m/19.68 ft
Suitable for a wide range of vehicles: cars, small trucks, minivans, etc. 12V operating voltage only
Package includes
1 x Car rear/front/side view camera
1 x Video cable
1 x Power cable
2 x Screws